Fujitsu MAN3735MC Manual/User Guide - Page 115
Sense Data Analysis, 7.2.1 Error information indicated with sense data
![]() |
View all Fujitsu MAN3735MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
7.2 Sense Data Analysis 7.2.1 Error information indicated with sense data Subsection 7.2.2 onwards explain troubleshooting using sense data. Table 7.1 lists the definition of sense data. For details of sense data, refer to the SCSI Logical Interface Specifications. Table 7.1 Definition of sense data Sense data Sense key Sense Code Sub Sense Code Definition 00 00 00 Operation was normal. 3 0C 03 A write to a disk terminated abnormally. 4 32 01 Failed to update the defect list due to a disk medium write error, etc. 40 xx An error occurred in power-on self-diagnosis. 44 xx A hardware error occurred inside IDD. C4 xx A drive error occurred. 1 1x xx A disk read error occurred. 3 1x xx A disk read error occurred. E 1D 00 Data discrepancy found by VERIFY command byte check. 5 2x xx An SCSI error, such as an invalid operation code, occurred. 3D 00 The Reserve bit of the IDENTIFY message was set to 1. 90 00 The RESERVE or RELEASE command cannot be executed because the SCSI ID of the INIT was not posted in the SELECTION phase. A parity error occurred in the SCSI data bus. B 47 xx An unmounted or inappropriate message was received. B 49 00 Before completion of a command, a command with the same tag B 4D xx number was issued. An overlap command was issued. B 4E 00 C141-E128-01EN 7 - 3
![](/manual_guide/products/fujitsu-man3184mc-manualuser-guide-f860562/115.png)