Garmin GPSMAP 496 Owner's Manual (for North America) - Page 28
Viewing Communication Frequencies, Viewing Airspace Alert Information, Ahead, Near & Ahead
View all Garmin GPSMAP 496 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Aviation Basic Operation in Aviation Mode > Finding a Nearby Point Viewing Communication Frequencies The Nearest Pages list up to five nearest flight service station (FSS) and air route traffic control center (ARTCC) points of communication. The closest communication point is shown first, with additional points available when selected. For duplex operation, the corresponding VOR is listed (by identifier) and the transmit and receive frequencies are denoted by a TX and RX respectively. To view additional communication frequencies: 1. Press NRST to open the Nearest Pages. 2. Use the ROCKER to select the ARTCC or FSS sub tab. 3. Press the ROCKER down to highlight Center or Station (based on which tab you are on), and press Enter. 4. Select the numbered item that you want from the list, and press Enter to show the communication information. The lowest numbers on the list are the closest communication points. Viewing Airspace Alert Information When an airspace alert appears, press NRST to automatically show nearby airspace information in the Airspace tab. This information includes name, time to entry (if applicable), and status. Normally, only one or two airspace alerts occur at a time, but with sectorized controlled airspace, such as many Class B areas, there are more. Status information can appear as follows: Ahead-your projected course takes you inside an airspace within the next 10 minutes or less. Near-you are within two nautical miles of an airspace but not projected to enter it. Near & Ahead-you are within two nautical miles of an airspace and your current course takes you inside the airspace. Inside Airspace-you are within the boundaries of the airspace. ARTCC Tab 20 GPSMAP 496 Owner's Manual