Garmin RINO 110 Owner's Manual - Page 19
To scan or monitor a channels, To setup a Scanlist, Off/On - gps manual
UPC - 753759031947
View all Garmin RINO 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
To scan or monitor a channel(s): 1. Using the Thumb Stick, highlight the Scan or Monitor button and then press In. Scan starts searching through the available channels. Monitor opens the channel to listen to any radio transmissions on that channel. 2. To stop using either option, highlight the button again and press the Thumb Stick In. To setup a Scanlist: 1. Using the Thumb Stick, highlight the Option Menu on-screen button and press In. Highlight Setup Scanlist and press the Thumb Stick In. 2. To add/remove a channel from the list, highlight the channel and press the Thumb Stick In to add/remove the check mark in front of the name. Only channels that are checked are scanned. To select all channels or clear all channels, select either the Select All or Clear All buttons and press the Thumb Stick In. UNIT OPERATION > RADIO PAGE 3. To begin scanning the codes you selected, highlight the Option Menu and press the Thumb Stick In. Choose Scan Current Codes and press the Thumb Stick In. Radio Page Option Menu Scanlist Page The Radio Page Option Menu provides the following: Setup Radio, Setup Tones, Setup Scanlist, Turn Radio Off/On, and Turn GPS Off/On. Refer to the following pages for explanations of each item in the Radio Page Option Menu. Rino® 110 Owner's Manual 13