Garmin RINO 110 Owner's Manual - Page 22
Setup Scanlist, Turn Radio/GPS On/Off, Informational Picture, GPS Status, Radio Transmission Status - can t find satellites
UPC - 753759031947
View all Garmin RINO 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
UNIT OPERATION > RADIO PAGE Setup Scanlist Refer to "Scanning and Monitoring" previously in this manual for complete information about this feature and the options in this page. Turn Radio/GPS On/Off Press the Thumb Stick In on either of these two options to toggle them from on to off. For example, to turn GPS Off, press the Thumb Stick In when Turn GPS Off is highlighted. Informational Picture The Informational Picture on the bottom half of the Radio Page features Garmin's Mr. Mark Waypoint figure showing current GPS and radio status, and radio actions. As you operate the unit, the graphics change depending on what actions you are taking and the unit settings. GPS Status Four satellites are shown on at the top of the picture along with descriptive text to indicate GPS reception status. As the unit collects satellite information, the satellite 16 symbols flash alternately until all four are steady to indicate a 3D position fix. The more satellites that are steady, the better your position fix. Radio Transmission Status As radio signals come in, signal wave symbols ( ) display to the left of Mark Waypoint. Fragmented (or broken) signal symbols ( ) are shown to indicate activity on that channel. Audio remains muted because the incoming signal does not match the squelch code your unit is set to. Informational Picture showing Mark Waypoint Rino® 110 Owner's Manual