Garmin Zumo 660 Owner's Manual - Page 8

Getting Started Installing the Battery 1. Locate the lithium‑ion battery that came in the product box. 2. Slide the release key until the battery cover on the back of the zūmo pops up. 3. Locate the metal contacts on the end of the lithium‑ion battery. 4. Insert the battery so that the metal contacts on the battery align with the metal contacts inside the battery compartment. 5. Replace the battery cover. Mounting Your zūmo in an Automobile Warning: Do not use the suction cup mount on a motorcycle. 1. Plug the automotive power cable into the power connector on the right side of the cradle. Release button Cradle Automotive power cable 3. Place the suction cup on the windshield. 4. Flip the lever back, toward the windshield. 5. Snap the cradle onto the suction cup arm. 6. Fit the bottom of your zūmo into the cradle. 7. Tilt the zūmo back until it snaps into place. Caution: Always keep the battery installed when the zūmo is on.  2. Remove the clear plastic from the suction cup. Clean and dry your windshield and the suction cup with a lint-free cloth. Suction cup mount 8. Plug the other end of the automotive power cable into a power outlet in your car. 9. If you are using a traffic receiver in Europe, secure the antenna on the traffic receiver to the windshield using the suction cups. W arning: This product contains a lithiumion battery. To prevent damage, remove the unit from the vehicle when exiting or store it out of direct sunlight. zūmo 600 Series Owner's Manual