Garmin eTrex Vista Owner's Manual - Page 29
To Calibrate the Electronic Compass - h manual
UPC - 753759028329
View all Garmin eTrex Vista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Navigation When you manually turn the Compass Off, it stays off until you manually turn it On again. Sometimes, however, when you turn the Compass On, the eTrex Vista overrides the Compass and uses the GPS receiver to track your heading. The criteria for switching between the Compass and the GPS is customized on the 'Heading' Setup Page. (See page 51.) To Calibrate the Electronic Compass: 1. Use the PAGE button to access the Navigation Page. 2. Use the THUMB STICK to highlight the Options Menu on-screen button and then press it in. 3. Highlight the 'Calibrate Compass' option and press the THUMB STICK to display the Calibration Page. 4. Press the THUMB STICK to activate the 'Start' button and then follow on-screen directions for holding and turning the unit. The unit displays a "Just Right", "Too Fast" or "Too Slow" message for you to adjust your turning speed as needed. The "Calibration Successful" message displays when finished. If a "Calibration Failed" message displays, repeat the process. The Electronic Compass must be calibrated outdoors when you first use the eTrex Vista and after new batteries have been installed. The accuracy of the Electronic Compass is adversely affected if the unit is not held level or by nearby items that generate magnetic fields, such as cars and buildings, etc. Options A Compass Icon is displayed on this page and the Map Page to indicate that the Compass is On. Electronic Compass On/Off Message. Message turns off after 3 seconds. 19