Garmin fenix 3 Owners Manual - Page 17

5 Select a data screen to customize. 6 Select an option: • Select Status to turn the data screen on or off. • Select Layout to adjust the number of data fields on the data screen. • Select a field to change the data that appears in the field. Adding a Map to an Activity You can add the map to the data screens loop for an activity. 1 Hold UP. 2 Select Settings > Apps. 3 Select the activity to customize. 4 Select Data Screens > Map. 5 Select Status to turn the map on or off. 6 Configure additional map settings (optional) (Customizing Map Features). Alerts You can set alerts for each activity, which can help you to train toward specific goals, to increase your awareness of your environment, and to navigate to your destination. Some alerts are available only for specific activities. There are three types of alerts: event alerts, range alerts, and recurring alerts. Event alert: An event alert notifies you once. The event is a specific value. For example, you can set the device to alert you when you reach a specified elevation. Range alert: A range alert notifies you each time the device is above or below a specified range of values. For example, you can set the device to alert you when your heart rate is below 60 beats per minute (bpm) and over 210 bpm. Recurring alert: A recurring alert notifies you each time the device records a specified value or interval. For example, you can set the device to alert you every 30 minutes. Alert Name Alert Type Cadence Range Calories Custom Event, recurring Recurring Distance Recurring Elevation Range Heart Rate Range Pace Range Power Range Run/Walk Recurring Speed Range Time Event, recurring Description You can set minimum and maximum cadence values. You can set the number of calories. You can select an existing message or create a custom message and select an alert type. You can set a distance interval. You can set minimum and maximum elevation values. You can set minimum and maximum heart rate values or select zone changes. See About Heart Rate Zones and Heart Rate Zone Calculations. You can set minimum and maximum pace values. You can set the high or low power level. You can set timed walking breaks at regular intervals. You can set minimum and maximum speed values. You can set a time interval. Setting an Alert 1 Hold UP. 2 Select Settings > Apps. 3 Select an activity. NOTE: This feature is not available for all activities. 4 Select Alerts. 5 Select an option: • Select Add New to add a new alert for the activity. • Select the alert name to edit an existing alert. 6 If necessary, select the type of alert. 7 Select a zone, enter the minimum and maximum values, or enter a custom value for the alert. 8 If necessary, turn on the alert. For event and recurring alerts, a message appears each time you reach the alert value. For range alerts, a message appears each time you exceed or drop below the specified range (minimum and maximum values). Enabling Auto Pause® You can use the Auto Pause feature to pause the timer automatically when you stop moving. This feature is helpful if your activity includes stop lights or other places where you must stop. NOTE: History is not recorded while the timer is stopped or paused. 1 Hold UP. 2 Select Settings > Apps. 3 Select an activity. NOTE: This feature is not available for all activities. 4 Select Auto Pause. 5 Select an option: • To pause the timer automatically when you stop moving, select When Stopped. • To pause the timer automatically when your pace or speed drops below a specified level, select Custom. Auto Lap® Marking Laps by Distance You can use Auto Lap to mark a lap at a specific distance automatically. This feature is helpful for comparing your performance over different parts of an activity (for example, every 1 mile or 5 kilometers). 1 Hold UP. 2 Select Settings > Apps. 3 Select an activity. NOTE: This feature is not available for all activities. 4 Select Auto Lap. 5 Select an option: • Select Auto Lap to turn Auto Lap on or off. • Select Auto Distance to adjust the distance between laps. Each time you complete a lap, a message appears that displays the time for that lap. The device also beeps or vibrates if audible tones are turned on (System Settings). If necessary, you can customize the data pages to display additional lap data (Customizing the Data Screens). Customizing the Lap Alert Message You can customize one or two data fields that appear in the lap alert message. 1 Hold UP. 2 Select Settings > Apps. 3 Select an activity. NOTE: This feature is not available for all activities. 4 Select Auto Lap > Lap Alert. 5 Select a data field to change it. 6 Select Preview (optional). Customizing Your Device 13