Garmin vivoactive 3 Music Owners Manual - Page 25

Changing the Bands

Page 25 highlights

Specifications Battery type Battery life Operating temperature range Charging temperature range Wireless frequencies/ protocols Water rating Rechargeable, built-in lithium-polymer battery Up to 7 days in smartwatch mode (with heart rate) Up to 5 hr. in GPS mode (with heart rate and music playback) From -20º to 60ºC (from -4º to 140ºF) From 0º to 45ºC (from 32º to 113ºF) 2.4 GHz @ 8 dBm nominal • ANT+ wireless communications protocol • Bluetooth 4.2 technology • Wi‑Fi wireless technology 13.56 MHz @ -40 dBm nominal, NFC wireless technology Swim, 5 ATM1 Device Care NOTICE Avoid extreme shock and harsh treatment, because it can degrade the life of the product. Avoid pressing the keys under water. Do not use a sharp object to clean the device. Never use a hard or sharp object to operate the touchscreen, or damage may result. Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes. Thoroughly rinse the device with fresh water after exposure to chlorine, salt water, sunscreen, cosmetics, alcohol, or other harsh chemicals. Prolonged exposure to these substances can damage the case. Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage. Cleaning the Device NOTICE Even small amounts of sweat or moisture can cause corrosion of the electrical contacts when connected to a charger. Corrosion can prevent charging and data transfer. 1 Wipe the device using a cloth dampened with a mild detergent solution. 2 Wipe it dry. After cleaning, allow the device to dry completely. TIP: For more information, go to www.garmin.com/fitandcare. Changing the Bands The device is compatible with 20 mm wide, standard, quickrelease bands. 1 Slide the quick-release pin on the spring bar to remove the band. 2 Insert one side of the spring bar for the new band into the device. 1 The device withstands pressure equivalent to a depth of 50 m. For more information, go to www.garmin.com/waterrating. Troubleshooting 3 Slide the quick-release pin, and align the spring bar with the opposite side of the device. 4 Repeat steps 1 through 3 to change the other band. Troubleshooting Is my smartphone compatible with my device? The vívoactive device is compatible with smartphones using Bluetooth wireless technology. Go to www.garmin.com/ble for compatibility information. My phone will not connect to the device If your phone will not connect to the device, you can try these tips. • Turn off your smartphone and your device, and turn them back on again. • Enable Bluetooth technology on your smartphone. • Update the Garmin Connect app to the latest version. • Remove your device from the Garmin Connect app to retry the pairing process. If you are using an Apple device, you should also remove your device from the Bluetooth settings on your smartphone. • If you bought a new smartphone, remove your device from the Garmin Connect app on the smartphone you intend to stop using. • Bring your smartphone within 10 m (33 ft.) of the device. • On your smartphone, open the Garmin Connect app, select or , and select Garmin Devices > Add Device to enter pairing mode. • Hold the touchscreen, and select Settings > Connectivity > Phone > Pair Phone. My headphones will not connect to the device If your headphones were previously connected to your smartphone using Bluetooth technology, they may connect to your smartphone before connecting to your device. You can try these tips. • Turn off Bluetooth technology on your smartphone. Refer to the owner's manual for your smartphone for more information. • Stay 10 m (33 ft.) away from your smartphone while connecting headphones to your device. • Pair your headphones with your device (Connecting Bluetooth Headphones, page 5). My music cuts out or my headphones do not stay connected When using a vívoactive 3 Music device connected to headphones using Bluetooth technology, the signal is strongest when there is a direct line of sight between the device and the antenna on the headphones. • If the signal passes through your body, you may experience signal loss or your headphones may become disconnected. • It is recommended to wear your headphones with the antenna on the same side of your body as your vívoactive 3 Music device. My device is in the wrong language You can change the device language selection if you have accidently selected the wrong language on the device. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Specifications
Battery type
Rechargeable, built-in lithium-polymer battery
Battery life
Up to 7 days in smartwatch mode (with heart rate)
Up to 5 hr. in GPS mode (with heart rate and
music playback)
Operating
temperature range
From -20º to 60ºC (from -4º to 140ºF)
Charging
temperature range
From 0º to 45ºC (from 32º to 113ºF)
Wireless
frequencies/
protocols
2.4 GHz @ 8 dBm nominal
ANT+ wireless communications protocol
Bluetooth 4.2 technology
Wi
Fi wireless technology
13.56 MHz @ -40 dBm nominal, NFC wireless
technology
Water rating
Swim, 5 ATM
1
Device Care
NOTICE
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Avoid pressing the keys under water.
Do not use a sharp object to clean the device.
Never use a hard or sharp object to operate the touchscreen, or
damage may result.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to
chlorine, salt water, sunscreen, cosmetics, alcohol, or other
harsh chemicals. Prolonged exposure to these substances can
damage the case.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Cleaning the Device
NOTICE
Even small amounts of sweat or moisture can cause corrosion
of the electrical contacts when connected to a charger.
Corrosion can prevent charging and data transfer.
1
Wipe the device using a cloth dampened with a mild
detergent solution.
2
Wipe it dry.
After cleaning, allow the device to dry completely.
TIP:
For more information, go to
www.garmin.com/fitandcare
.
Changing the Bands
The device is compatible with 20 mm wide, standard, quick-
release bands.
1
Slide the quick-release pin on the spring bar to remove the
band.
2
Insert one side of the spring bar for the new band into the
device.
1
The device withstands pressure equivalent to a depth of 50 m. For more
information, go to
www.garmin.com/waterrating
.
3
Slide the quick-release pin, and align the spring bar with the
opposite side of the device.
4
Repeat steps 1 through 3 to change the other band.
Troubleshooting
Is my smartphone compatible with my
device?
The vívoactive device is compatible with smartphones using
Bluetooth wireless technology.
Go to
www.garmin.com/ble
for compatibility information.
My phone will not connect to the device
If your phone will not connect to the device, you can try these
tips.
Turn off your smartphone and your device, and turn them
back on again.
Enable Bluetooth technology on your smartphone.
Update the Garmin Connect app to the latest version.
Remove your device from the Garmin Connect app to retry
the pairing process.
If you are using an Apple device, you should also remove
your device from the Bluetooth settings on your smartphone.
If you bought a new smartphone, remove your device from
the Garmin Connect app on the smartphone you intend to
stop using.
Bring your smartphone within 10 m (33 ft.) of the device.
On your smartphone, open the Garmin Connect app, select
or
, and select
Garmin Devices
>
Add Device
to enter
pairing mode.
Hold the touchscreen, and select
Settings
>
Connectivity
>
Phone
>
Pair Phone
.
My headphones will not connect to the
device
If your headphones were previously connected to your
smartphone using Bluetooth technology, they may connect to
your smartphone before connecting to your device. You can try
these tips.
Turn off Bluetooth technology on your smartphone.
Refer to the owner's manual for your smartphone for more
information.
Stay 10 m (33 ft.) away from your smartphone while
connecting headphones to your device.
Pair your headphones with your device (
Connecting
Bluetooth Headphones
, page 5
).
My music cuts out or my headphones do not
stay connected
When using a vívoactive 3 Music device connected to
headphones using Bluetooth technology, the signal is strongest
when there is a direct line of sight between the device and the
antenna on the headphones.
If the signal passes through your body, you may experience
signal loss or your headphones may become disconnected.
It is recommended to wear your headphones with the
antenna on the same side of your body as your vívoactive 3
Music device.
My device is in the wrong language
You can change the device language selection if you have
accidently selected the wrong language on the device.
Troubleshooting
21