Gateway E-9722R Gateway E-9722R Server User Guide - Page 46
Important, down 2, making sure that the retaining clip is inserted into the hole in the chassis.
View all Gateway E-9722R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
CHAPTER 4: Installing Components 5 Lift one side of the fan cage (2) and disengage the retention tab (3), then disconnect the fan power and fan tach cables from the system board and remove the fan cage from the chassis. 6 Insert the fans into the new fan cage. Important Make sure that the arrows on top of the fans indicating airflow point to the back of the chassis. 7 Connect the fan power and fan tach cables to the system board, then insert the retention tab (1) into the corresponding clip on the chassis and push the other side of the fan cage down (2), making sure that the retaining clip is inserted into the hole in the chassis. 8 Replace the fan duct by placing it into the chassis. 9 Follow the instructions in "Closing the server case" on page 27. 40