Gateway E-9722R Gateway E-9722R Server User Guide - Page 51
connectors on the system board., for the location of
View all Gateway E-9722R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
www.gateway.com 6 Loosen the thumbscrew (1), then lift the distribution module slightly and move it toward the front of the case (2) to release it from the three locking tabs. 7 Lift the power distribution board (3) out of the chassis. 8 Insert the new power distribution board into the chassis, then move it toward the back of the chassis to engage the three locking tabs. 9 Tighten the thumbscrew to secure the power distribution board in the chassis. 10 Reconnect the power cables. See "System board" on page 5 for the location of the connectors on the system board. 11 Replace the system fan cage and fan duct by following the instructions in "Replacing system fans" on page 38. 12 Reinstall the PCI riser assembly by following the instructions in "Removing and installing the PCI riser assembly, a riser, or a PCI card" on page 34. 13 Follow the instructions in "Closing the server case" on page 27. 45