Gateway E-9722R Gateway E-9722R Server User Guide - Page 53

Installing and removing an optional mezzanine board

Get Gateway E-9722R PDF manuals and user guides View all Gateway E-9722R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

www.gateway.com 10 Holding the new backplane by the edges only, align it with the locking tabs on the backplane bracket, then place it on the locking tabs (1) and slide it to the right until it click into place. Caution Make sure you do not pinch, bind, or damage any cables as you install the backplane. 11 Insert the backplane assembly into the chassis (2), then press down on the assembly until the locking tabs on the chassis engage the holes on the right and left sides of the bracket. 12 Reconnect all cables to the backplane. 13 Replace the system fans and fan cage, and the fan duct by following the instructions in "Replacing system fans" on page 38. 14 Follow the instructions in "Closing the server case" on page 27. 15 Reinstall the hot-swap drives back into the server. Make sure that you install the drives into the same bays you removed them from in Step 4. For instructions see "Removing and installing a hard drive" on page 29. 16 Replace the bezel by snapping it into place on the front of the server. Installing and removing an optional mezzanine board For information on installing or removing the optional mezzanine board, refer to the Mazzanine Board User Guide. 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
www.gateway.com
47
10
Holding the new backplane by the edges only, align it with the locking tabs on the backplane
bracket, then place it on the locking tabs (1) and slide it to the right until it click into place.
11
Insert the backplane assembly into the chassis (2), then press down on the assembly until
the locking tabs on the chassis engage the holes on the right and left sides of the bracket.
12
Reconnect all cables to the backplane.
13
Replace the system fans and fan cage, and the fan duct by following the instructions in
“Replacing system fans” on page 38.
14
Follow the instructions in
“Closing the server case” on page 27
.
15
Reinstall the hot-swap drives back into the server. Make sure that you install the drives into
the same bays you removed them from in
Step 4
. For instructions see
“Removing and
installing a hard drive” on page 29
.
16
Replace the bezel by snapping it into place on the front of the server.
Installing and removing an optional mezzanine
board
For information on installing or removing the optional mezzanine board, refer to the Mazzanine
Board User Guide.
Caution
Make sure you do not pinch, bind, or damage any cables as you install the
backplane.