Gateway E-9722R Gateway E-9722R Server User Guide - Page 56

Follow the instructions in, Reinstall the PCI riser assembly by following the instructions

Get Gateway E-9722R PDF manuals and user guides View all Gateway E-9722R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

CHAPTER 4: Installing Components 8 Loosen the two thumbscrews (1) that secure the system board to the server. 2 2 2 2 2 1 50 1 9 Slide the system board toward the back of the server until it is free of the five retaining standoffs (2), then lift the board from the chassis. 10 Place the old system board in a static-free bag for storage. 11 Insert the new system board into the chassis, aligned with the eight retaining standoffs, then slide the board toward the front of the case so the board is held by the standoffs. 12 Tighten the two system board thumbscrews you loosened in Step 8. 13 Connect the cables you removed in Step 7 14 Replace the heatsink(s) and processor(s) Follow the instructions in "Replacing or adding a processor" on page 41. 15 Replace the memory by following the instructions in "Installing memory" on page 31. 16 Replace the system fan cage and fan duct by following the instructions in "Replacing system fans" on page 38. 17 Reinstall the PCI riser assembly by following the instructions in "Installing and removing PCI expansion cards" on page 34. 18 Follow the instructions in "Closing the server case" on page 27. 19 Restart your server, then press F2 at any time after you see the LEDs on your keyboard flash or turn off. The BIOS Setup utility opens. 20 Check BIOS settings to make sure that they detect the server's new hardware, then save your changes (if any) and close the BIOS Setup utility. 21 If your server does not start after installing the new system board, contact Gateway Customer Care. For more information, see "Getting Help" on page 9.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
CHAPTER 4: Installing Components
50
8
Loosen the two thumbscrews (1) that secure the system board to the server.
9
Slide the system board toward the back of the server until it is free of the five retaining
standoffs (2), then lift the board from the chassis.
10
Place the old system board in a static-free bag for storage.
11
Insert the new system board into the chassis, aligned with the eight retaining standoffs,
then slide the board toward the front of the case so the board is held by the standoffs.
12
Tighten the two system board thumbscrews you loosened in
Step 8
.
13
Connect the cables you removed in
Step 7
14
Replace the heatsink(s) and processor(s) Follow the instructions in
“Replacing or adding a
processor” on page 41
.
15
Replace the memory by following the instructions in
“Installing memory” on page 31
.
16
Replace the system fan cage and fan duct by following the instructions in
“Replacing system
fans” on page 38
.
17
Reinstall the PCI riser assembly by following the instructions in
“Installing and removing
PCI expansion cards” on page 34
.
18
Follow the instructions in
“Closing the server case” on page 27
.
19
Restart your server, then press F2 at any time after you see the LEDs on your keyboard
flash or turn off. The BIOS Setup utility opens.
20
Check BIOS settings to make sure that they detect the server’s new hardware, then save
your changes (if any) and close the BIOS Setup utility.
21
If your server does not start after installing the new system board, contact Gateway
Customer Care. For more information, see
“Getting Help” on page 9
.
2
2
2
2
1
2
1