Gateway FX530XV 8511781 - FX Reference Guide - Page 50

To change the clock speed of your processor

Page 50 highlights

Overclocking the processor To change the clock speed of your processor: 1 Turn off your computer and disconnect the power cord. 2 Place your computer on its side with the side accesss panel facing up. 3 Follow the anti-static precautions in "Preventing static electricity discharge" on page 50. 4 Open the side panel and locate the jumper labeled J3C2 BIOS Config on the system board. J3C2 BIOS Config jumper J2B3 jumper (do not adjust) 5 Remove the jumper from its normal position (bridging pins 1-2), then place it in the maintenance boot position (bridging pins 2-3). 6 Reconnect the power cord. 7 Turn on your. The BIOS Setup utility opens. 8 Press the arrow keys to select the Performance tab. Press the arrow keys to highlight Set Processor Multiplier, then press Enter. 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143

Overclocking the processor
45
To change the clock speed of your processor:
1
Turn off your computer and disconnect the
power cord.
2
Place your computer on its side with the
side accesss panel facing up.
3
Follow the anti-static precautions in
“Preventing static electricity discharge” on
page 50.
4
Open the side panel and locate the jumper
labeled
J3C2 BIOS Config
on the system
board.
5
Remove the jumper from its normal
position (bridging pins 1-2), then place it in
the maintenance boot position (bridging
pins 2-3).
6
Reconnect the power cord.
7
Turn on your. The BIOS Setup utility opens.
8
Press the arrow keys to select the
Performance
tab. Press the arrow keys to
highlight
Set Processor Multiplier
, then
press
Enter
.
J3C2 BIOS
Config jumper
J2B3 jumper
(do not adjust)