Gateway FX530XV 8511781 - FX Reference Guide - Page 70
If you are replacing a drive, reconnect
View all Gateway FX530XV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Adding or replacing a hard drive 6 Remove the hard drive by sliding it out of the drive bay. 7 Note any jumper settings on the old drive and set the jumper on the new drive to be the same. If you are installing a new drive, follow the manufacturer's instructions. Jumper 8 Slide the new drive into the drive bay, then secure it in the drive bay by sliding the drive release latch in toward the computer. 9 If you are replacing a drive, reconnect the drive cables using your notes from Step 4. If you are installing a new drive, follow the manufacturer's instructions for connecting it to the system board. 65
Adding or replacing a hard drive
65
6
Remove the hard drive by sliding it out of
the drive bay.
7
Note any jumper settings on the old drive
and set the jumper on the new drive to be
the same. If you are installing a new drive,
follow the manufacturer’s instructions.
8
Slide the new drive into the drive bay, then
secure it in the drive bay by sliding the
drive release latch in toward the computer.
9
If you are replacing a drive, reconnect the
drive cables using your notes from Step 4.
If you are installing a new drive, follow the
manufacturer’s instructions for connecting
it to the system board.
Jumper