Gateway FX530XV 8511781 - FX Reference Guide - Page 62
Return your computer to its upright - desktop
![]() |
View all Gateway FX530XV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Adding or replacing memory 4 If you are removing a DIMM from the memory module bank, gently pull the plastic tabs away from the sides of the memory module and remove it. - OR If you are adding a DIMM to an empty memory module bank, gently pull the plastic tabs away from the sides of the memory module bank. Make sure that you install modules of the same type into both slots of a memory channel (bank). 5 Align the notches on the new DIMM with the notches on the memory module bank, then press the module firmly into the bank. The tabs on the sides of the memory module should secure the memory module automatically. When the module is secure, you hear a click. 6 Return your computer to its upright position. 7 Replace the side panel by following the instructions in "Replacing the side panel" on page 55. 8 Reconnect the cables and the power cord. 9 Turn on your computer. Windows starts and the Windows desktop appears. 57
![](/manual_guide/products/gateway-computers-fx530qs-8511781-fx-reference-guide-ffa6e1a/62.png)