GE AEM08LP Owners Manual - Page 11
Caution
View all GE AEM08LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installation Instructions [] PREPARE THE AIR CONDITIONER (cont.) © Slide the free end of the accordion panel into the side panel rails. Slide the panel down. Be sure to leave enough space to slip the top and bottom of the frame into the rails on the cabinet. NOTE: There is a right and a left accordion panel. Be sure to use the proper panel for each side. INSTALL THE AIR CONDITIONER IN THE WINDOW Place the air conditioner on the sill with the bottom mounting rail against its back edge. Center it and close the window securely behind the top mounting rail. It should be level or slightly tilted to the outside. Use a level; about a 1/3 bubble will be the correct case slant to the outside. /I [] Slide the left and right accordion panels into the top and bottom mounting rails. Top left Top mounting rail Top ight Bottom mounting rail ITI PREPARE THE WINDOW Cut the window sash seal to the proper length. Peel off the backing and attach the seal to the underside of the window sash. Type B screws % Extend the left and right accordion panels to the vertical window sashes and attach, through the holes in the panels, with 5 Type B screws, as appropriate. rfl INSTALL SUPPORT BRACKET AND FOAM TOP WINDOW GASKET B] CAUTION: To prevent broken glass or damage to windows, on vinyl or other similarly constructed windows, attach the window locking bracket to the window side jamb with one Type B screw. Vinyl Wood % Cut the foam top window gasket to the window width. © Stuff the foam between the glass and the window to prevent air and insects from getting into the room. NOTE: If the gasket supplied does not fit your window, obtain appropriate material locally to provide a proper installation seal. 11