GE NX-148E User Manual - Page 15

VIEW ZONE STATUS Step 1 Press r • . The LCD Screen will display the zone status. Step 2 Use the • - scroll keys to browse through the descriptions. The LCD Screen will display the list of all zones in sequential order by zone number. Step 3 Press [#] to exit this function. SETTING THE KEYPAD TONE Step 1 Press r 0 . Keypad is now in the "Adjust Tone" mode. Step 2 Press • to adjust the keypad sounder to higher tones. Raise tone º Step 3 Press - to adjust the keypad Lower tone º sounder to lower tones. Step 4 When the desired tone is reached, press # to set this tone and exit from the "Adjust Tone" mode. VIEW ALARM MEMORY Step 1 Press r 3 to display the zone(s) on the keypad that created the last alarm. Step 2 The LCD Screen will description for those display zones. the zone Alarm Memory ZONE 1 1 Step 3 Press [#] to exit the alarm memory. TEST FUNCTION (Optional, if programmed) If programmed, this function will perform a battery test, communicator test, and/or a siren test. No alarms will be sent, and no reports will be sent unless a communicator test is performed, in which case a test signal will be sent. Step 1 Press r 4 4 . The test will be performed as programmed. Step 2 If the siren test is performed, enter a user code to silence the siren. NX148E-CF 13