GE NX-148E User Manual - Page 21

Partitioned Systems Operation - keypad manual

Page 21 highlights

PARTITIONED SYSTEMS OPERATION This system is " is not " partitioned. If your system is multi-partitioned and the keypad resides in one partition, your keypad will provide the status of the zones in your partitioning by using the screen messages described earlier in this manual. The Master Mode of operation allows you to temporarily access any partition (providing your code is authorized) within the system and to perform functions in other partitions. Read this entire manual to help you understand the different screen messages that will be displayed from your keypad. NOTE: r 1 will temporarily access the Master Mode. The keypad will revert back to its assigned partition 60 seconds after a keypress, or 10 seconds without a keypress. Press [#] to exit this mode. LIGHTS IN PARTITIONING MASTER MODE ARMED will illuminate if ALL partitions are armed. READY will illuminate if ALL partitions are "Ready". The ready light will flash if all areas are Ready or Force armable. FIRE will illuminate if ANY one area has a Fire condition. The fire light will flash if ANY area has a Fire Trouble condition. POWER will illuminate if the primary power is connected to the NX-8 control panel. It will flash if the system has a low standby battery condition. STAY will illuminate if ANY area has the stay light on. CHIME will illuminate if ANY partition is in the "Chime" mode. EXIT will illuminate if ANY area is timing an exit delay. It will flash if ANY area is in the last 10 seconds of an exit delay. BYPASS will illuminate if ANY area has a zone bypassed. CANCEL will flash if ANY partition is in an abort delay time. If a code is entered followed by the [CANCEL] key during or after an alarm report, the cancel light will illuminate and remain constant until the central station has received the cancel report. SOUNDER will sound if ANY area has the sounder on. This includes Entry delay, Exit delay, Chime, and Alarm. DISPLAYS IN THE PARTITIONING MASTER MODE ARMED and READY STATUS The LCD screen will display the Armed and Ready status of ALL eight (8) partitions if any or all of the areas is armed or not ready. NX148E-CF 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

NX148E-CF
19
PARTITIONED SYSTEMS OPERATION
This system is
is not
partitioned.
If your system is multi-partitioned and the keypad resides in one partition, your
keypad will provide the status of the zones in your partitioning by using the screen
messages described earlier in this manual.
The Master Mode of operation allows
you to temporarily access any partition (providing your code is authorized) within
the system and to perform functions in other partitions.
Read this entire manual to
help you understand the different screen messages that will be displayed from
your keypad.
NOTE
:
r
1
will
temporarily
access the Master Mode.
The keypad will
revert back to its assigned partition 60 seconds after a keypress, or 10 seconds
without a keypress.
Press [#] to exit this mode.
LIGHTS IN PARTITIONING MASTER MODE
±
ARMED
will illuminate if ALL
partitions are armed.
±
READY
will illuminate if ALL
partitions are "Ready".
The
ready light
will flash
if all areas are Ready or Force armable.
±
FIRE
will illuminate if ANY one area has a Fire condition.
The
fire light
will
flash if ANY area has a Fire Trouble condition.
±
POWER
will illuminate if the primary power is connected to the NX-8 control
panel.
It will flash if the system has a low standby battery condition.
±
STAY
will illuminate if ANY area has the
stay light
on.
±
CHIME
will illuminate if ANY partition is in the "Chime" mode
.
±
EXIT
will illuminate if ANY area is timing an exit delay.
It will flash if ANY area
is in the last 10 seconds of an exit delay.
±
BYPASS
will illuminate if ANY area has a zone bypassed.
±
CANCEL
will flash if ANY partition is in an abort delay time. If a code is
entered followed by the [
CANCEL
] key during or after an alarm report, the
cancel light
will illuminate and remain constant
until the central station has
received the cancel report.
±
SOUNDER
will sound if ANY area has the sounder on.
This includes Entry
delay, Exit delay, Chime, and Alarm.
DISPLAYS IN THE PARTITIONING MASTER MODE
±
ARMED and READY STATUS
The LCD screen will display the Armed and Ready status of ALL eight (8)
partitions if any or all of the areas is armed or not ready.