GE NX-148E User Manual - Page 28

DISPLAY Cancel Cancel Gnd Flt Man Test Ground Fault Manual Test Re-exit Re-Exit Output Trip Output Trip Data Lost Data Lost Walk-test End Test Cross-Trip Walk-Test End Test Cross Trip Expansion Event Partial Arm Listen In Service Start Service End Code Entry First Open Last Close Sprnklr Clock Set RF Jammed CleanMe Expansion Event Partial Arm Listen In Service Start Service End Code Entry First Open Last Close Sprinkler Clock Set RF Jammed CleanMe DESCRIPTION System is disarmed and the Cancel button was pressed within 5 minutes of an alarm. A short to ground has been detected. Bell and/or communicator test while system is in disarmed condition. The exit delay has been re-started without disarming the system. A trip has occurred on an expander auxiliary output. Communication of a signal has failed (log only event). A zone "Walk-Test" mode has been activated. Test has been ended. The first zone of a cross zone has been tripped (log only). An expansion module created an undefined event. Reports a closing in the stay mode. A listen in function has been activated. Technician is on site. Technician is off site. A code has been entered. Reports when the first partition is disarmed. Reports when the last partition is armed. Instant sprinkler supervisory report Clock has been reset. A wireless expansion module is jammed A smoke detector requires cleaning. 26 NX-148E-CF