GE PT9200SLSS Use and Care Manual - Page 21

Oven Door

Get GE PT9200SLSS PDF manuals and user guides View all GE PT9200SLSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

CARE AND CLEANING: 2YHQ 'RRU Oven Door Upper Oven Door 7KHXSSHUGRRUFRQWDLQVPDQ\RIWKHHOHFWURQLFVDQGFRQWUROVIRUWKHRYHQ,WLVUHFRPPHQGHGWKDWWKHXSSHUGRRUEH removed only by a trained service technician. Lower Oven Door 7KHORZHUGRRULVYHU\KHDY\%HFDUHIXOZKHQUHPRYLQJDQGOLIWLQJWKHGRRU 'RQRWOLIWWKHGRRUE\WKHKDQGOH To remove the door: Slot 1. Fully open the door. 2. Pull the hinge locks down toward the door frame, to the unlocked position. A tool, such as a small flat-blade screwdriver, may be required. 3. Firmly grasp both sides of the door at the top. 4. Close door to the door removal position. The door should be open approximately 3" with no obstruction above the door. Hinge lock Pull hinge locks down to unlock Removal position  /LIWGRRUXSDQGRXWXQWLOERWKKLQJHDUPVDUHFOHDURI the slots. To replace the door: 1. Firmly grasp both sides of the door at the top. 2. Starting on the left side, with the door at the same angle as the removal position, seat the indentation of the hinge arm into the bottom edge of the hinge slot. The notch in the hinge arm must be fully seated into the bottom of the slot. Repeat for right side. Hinge arm %RWWRP edge of slot Hinge arm  )XOO\RSHQWKHGRRU,IWKHGRRUZLOOQRWIXOO\RSHQWKH Hinge indentation is not seated correctly in the bottom edge lock of the slot. 4. Push the hinge locks up against the front frame of the oven cavity, to the locked position. Push hinge locks up to lock ,QGHQWDWLRQ 5. Close the oven door. 49-80786-1 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
49-80786-1
21
Lower Oven Door
To remove the door:
1. Fully open the door.
2. Pull the hinge locks down toward the door frame,
to the unlocked position. A tool, such as a small
flat-blade screwdriver, may be required.
3. Firmly grasp both sides of the door at the top.
4. Close door to the door removal position. The door
should be open approximately 3" with no obstruction
above the door.
the slots.
To replace the door:
1. Firmly grasp both sides of the door at the top.
2. Starting on the left side, with the door at the same
angle as the removal position, seat the indentation of
the hinge arm into the bottom edge of the hinge slot.
The notch in the hinge arm must be fully seated into
the bottom of the slot. Repeat for right side.
indentation is not seated correctly in the bottom edge
of the slot.
4. Push the hinge locks up against the front frame of the
oven cavity, to the locked position.
5. Close the oven door.
Upper Oven Door
removed only by a trained service technician.
Removal position
Hinge lock
Slot
Pull hinge locks down to unlock
Push hinge locks up to lock
Hinge
lock
Hinge
arm
edge of
slot
Hinge arm
CARE AND CLEANING:
Oven Door