Gigabyte GA-7TESH2-RH Manual - Page 11

Hardware Installation Process - positive

Get Gigabyte GA-7TESH2-RH PDF manuals and user guides View all Gigabyte GA-7TESH2-RH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Hardware Installation Process Chapter 2 Hardware Installation Process 2.1. Installing Processor and CPU Haet Sink Before installing the processor and cooling fan, adhere to the following cautions: 1. The processor will overheat without the heatsink and/or fan, resulting in permanent irreparable damage. 2. Never force the processor into the socket. 3. Apply thermal grease on the processor before placing cooling fan. 4. Please make sure the CPU type is supported by the motherboard. 5. If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause improper installation. Please change the insert orientation. 2.1.1. Installing CPU Step 1 Raise the metal locking lever on the socket. Step 2 Remove the plastic covering on the CPU socket. Step 3 Insert the CPU with the correct orientation. The CPU only fits in one orientation. Step 4 Once the CPU is properly placed, please replace the metal cover and push the metal lever back into locked position. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
11
Hardware Installation Process
Chapter 2
Hardware Installation Process
Before installing the processor and cooling fan, adhere to the following
cautions:
1.
The processor will overheat without the heatsink and/or fan, resulting in permanent
irreparable damage.
2.
Never force the processor into the socket.
3.
Apply thermal grease on the processor before placing cooling fan.
4.
Please make sure the CPU type is supported by the motherboard.
5.
If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause
improper installation. Please change the insert orientation.
2.1.
Installing Processor and CPU Haet Sink
2.1.1. Installing CPU
Step 1
Raise the metal locking lever on the socket.
Step 2
Remove the plastic covering on the CPU socket.
Step 3
Insert
the CPU with the correct orientation. The CPU only fits in one orientation.
Step 4
Once the CPU is properly placed, please replace the metal cover and push the metal
lever back into locked position.