Gigabyte GA-7TESH2-RH Manual - Page 30
PILOT_DIS PiotII disable jumper
View all Gigabyte GA-7TESH2-RH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
English GA-7TESH2-RH Motherboard 1 ) CLR_CMOS (Clear CMOS jumper) You may clear the CMOS data to its default values by this jumper. Default value doesn't include the "Shunter" to prevent from improper use this jumper. To clear CMOS, temporarily short 2-3 pin. 1 1-2 close: Normal operation (Default setting) 1 2-3 close: Clear CMOS 2 ) CLR_RTC (Clear RTC jumper) 1 1-2 close: Normal operation. (Default setting) 1 2-3 close: Clear RTC status 3 ) BIOS_RVCR (BIOS Revocery jumper) 1 1-2 close: Normal operation. (Default setting) 1 2-3 close: Enable BIOS Recovery function. 4 ) PASS_DIS (Skip Supervisor password jumper) 1 1-2 Close: Normal operation. (Default setting) 1 2-3 Close: Clear Supervisor Password in BIOS setup menu. 5 ) BMC_SEL (BMC Selection jumper) 1 1-2 Close: Normal operation. (Default setting) 1 2-3 Close: Enable BMC function. 6 ) PILOT_DIS (PiotII disable jumper) 1 1-2 Close: Normal operation. (Default setting) 1 2-3 Close: Disable BMC when firmware corrupted. 30