Hamilton Beach HBS1200 Operation Manual - Page 10

Operation Blending wWARNING wWARNING Electrical Shock Hazard Plug into a grounded outlet. Do not remove ground. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Cut Hazard Always make sure splash shield is in place when blending. Do not put hands, spoons or other utensils in jar when blending. Failure to follow these instructions can result in broken bones, cuts or other injuries. The blender is designed for mixing frozen beverages and desserts. Do NOT blend hot mixtures in the blender! Blending NOTE: Before you use the blender for the first time, wash and sanitize the container and cover (see Cleaning Instructions). The blender can operated manually, or as part of a programmed cycle. For details on use with programmed cycles, see "Automatic Cycles". To operate the blender manually, proceed as follows: 1. Remove the ice chute. 2. Place the ingredients to be blended in the container. 3. Place the cover and filler cap on the container. 4. Make sure the main power switch is in the ON ( I ) position. 5. Place the container onto the base. Make sure it is securely seated. If the container is not properly seated, the jar pad sensors (if enabled) will not allow the blender to start and an error message will be displayed when the PULSE button is pressed. 6. Press and hold the PULSE button on the control panel. The display will show the following message: HAMILTON BEACH COMMERCIAL PULSING... 7. Once the beverage or dessert has reached the desired consistency, release the PULSE button. 8. Remove the container to serve. 9. Clean the container as directed in "Care and Cleaning." PULSE button 10