Hamilton Beach HBS1200 Operation Manual - Page 6

Operation Control Panel Familiarize yourself with the control panel and the display messages before using the unit. PULSE button Blender jar must be in place. Allows manual blender operation. Press and hold to run the blender on high speed. Release to stop blender. SHAVE button Allows manual ice shaver operation. Press and hold to shave ice, release to stop ice shaver. Serving Size Buttons A-D Press A-D to select the desired serving size. Scroll up/down buttons Press the L or M button to scroll through status and diagnostic messages. START button Starts operation of the selected cycle. Number of Servings Buttons 1-4 Press 1-4 to select the desired number of servings (1 to 4). Display displays status messages STOP button Stops operation of the selected function. Does not shut off power to the unit. Display messages The screen can be used to display important diagnostic and troubleshooting information, as well as operating information. Press the L or M button to scroll through status and diagnostic messages. For Example: TOTAL SHAVE/BLEND CYCLES - 999999 To Display Cycle Count: While the unit is not in operation, press the L or M button to display the cycle counts. DRAIN SENSOR ENABLED To Enable or Disable the Drain Sensor: With this message displayed, press the pulse to select between enabled and disabled. JAR PAD SENSOR ENSABLED To Enable or Disable the Jar Pad Sensor: With this message displayed, press the pulse to select between enabled and disabled. 6