Harman Kardon CITATION RECEIVER Owners Manual - Page 5
Speakers, System, Right
View all Harman Kardon CITATION RECEIVER manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Lamp cord usually provides a "code" which differentiates the two conductors. A conductor may be coded by a rib, sharp corner (A), or indentations molded along the length of the insulation (B). In some cases, a thin colored thread is molded inside the insulation, along with one conductor CC). In others the coded conductor is darker in color (D). 5::.. Connecting Speakers Connect the bare ends of one segment of lamp cord to your right speaker system. Connect the coded conductor to the speaker's positive (" +') terminal, and the uncoded conductor to negative ("- '7. (The +" and "-" markings are in general use: although some speakers use other labeling systems, such as "1" and "2," "A" and "13,"andso on.; Find the row of four connectors on the back panel of the Cita- tion Receiver marked SPEAKER 1. Push firrn/yin on the redplastic head of the connector marked RIGHT to reveal an opening in the top. Insert the bare end of the coded conductor into the opening. Release the connector. The conductor should now be locked firmly into place. Insert the uncoded conductor into the adjacent black connector marked GND. SYSTEM RIGH- GNO GND LEFT SPEAKERS 3,16 OHMS SYSTEM RIGHT GND GND LEFT SYSTEM 3 RIGHT GND GND LEFT ti