Hayward Ecommand W/2Gva/Base/Aquaconne ECOMMAND-4-Installation-Manual-092419AR - Page 5

Optional AQL2-SS-RF Remote Control The ECOMMAND 4 is compatible with AQL2-SS-RF wireless remote control only. The AQL2-SS-RF is included with HPC-4-RC and HPC-4-ACT-RC models. The AQL2-SS-RF is a waterproof portable remote control that is designed to be used in and around the pool/spa area. The AQL2-SS-RF floats and can be left in the water for easy access. A single AQL2-BASE-RF Base Station must be installed on the ECOMMAND 4 in order to use this remote control. The maximum distance between the wireless remote and the base station on the ECOMMAND 4 main control unit is 400 feet (120m) line of sight or 200 feet (60m) through walls, etc. If in doubt about the distance, test operation before installing the remote. All wireless models require the user to run the "Teach Wireless" routine in the Settings Menu. This information can be found in the ECOMMAND 4 Operation Manual. Optional Base Station The AQL2-BASE-RF optional base station must be installed if the AQL2-SS-RF is used. The AQL2BASE-RF optional base station is included with HPC-4-RC and HPC-4-ACT-RC models. To install the base station, remove the knockout on the upper left side of the ECOMMAND 4 main control unit, insert the base station, and then tighten the nut from the inside. Also refer to the Base Station manual and the diagram on page 14. Optional Valve Actuators Optional valve actuators are included with HPC-4-ACT and HPC-4-ACT-RC models. For optional actuators used with the ECOMMAND 4-note that the internal cams in the actuator may also have to be adjusted depending on the way the actuator is mounted on the valve and the desired valve action. RETURN SUCTION OUT OUT IN IN IN (Common) OUT (Common) 4 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS