HP 10/100-TX Intel PRO/100 Intel LAN cards (D6507A, D6508A), Installation Guid - Page 12
Connecting to the Network
View all HP 10/100-TX Intel PRO/100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installation Guide HP 10/100 Intel® EtherExpressTM PRO/100+Management Adapter Connecting to the Network Connecting to the Network Connect the network cable to the RJ-45 UTP (Unshielded Twisted Pair) LAN connector. The LAN card supports both 10 Mbits/s and 100 Mbits/s operation. RJ-45 UTP Connector CAUTION Remote Wake Up The network interface card is able to wake the PC from a sleep state if it receives a special sequence (known as a Magic PacketTM) from the network. In order for the Wake On Lan feature to work correctly, the PRO/100+ MA card must be connected to a continuous power source. 8 English
Installation Guide HP 10/100 Intel
®
EtherExpress
TM
PRO/100+Management Adapter
Connecting to the Network
8 English
Connecting to the Network
Connect the network cable to the RJ-45 UTP (Unshielded Twisted
Pair) LAN connector. The LAN card supports both 10 Mbits/s and 100
Mbits/s operation.
Remote Wake Up
The network interface card is able to wake the PC from a sleep state if
it receives a special sequence (known as a Magic Packet
TM
) from the
network.
CAUTION
In order for the Wake On Lan feature to work correctly, the PRO/100+
MA card must be connected to a continuous power source.
RJ-45 UTP
Connector