HP 1010 HP Fax 1010 series - (English) User Guide - Page 43
care and, maintenance - ink cartridge installation
UPC - 886111550548
View all HP 1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
maintenance maintenance maintenance maintenance maintenance maintenance maintenance care and care and hp fax 1010 series clean the nozzles 1 Press Access Cartridge. 2 Open the front panel and cartridge compartment cover and remove the cartridge. See replace the print cartridge on page 34. 3 Gently blot and wipe the contacts and nozzles dry. • Use a clean cloth dampened with water to gently clean the entire copper-colored area, including the nozzles and contacts. • To dissolve any dried ink, hold the damp cloth against the nozzles for about three seconds. 4 Reinstall the cartridge and close the cover and panel. If you spend a long time cleaning the cartridge, the cartridge carrier may have moved back to the original position. If so, press Access Cartridge again to move the carrier to the install position. 5 Press Start/Enter. 6 Press 1 for new cartridge or 2 for the old one. clean the cartridge carrier contacts Before cleaning these parts, there should be no scheduled job such as delayed fax, send polling, or faxes received into memory. Caution: Once you have unplugged the power cord from the machine, all data in memory will be lost. 1 Press Access Cartridge. 2 Open the front panel and cartridge compartment cover and remove the cartridge. See replace the print cartridge on page 34. 3 Remove the print cartridge. 4 Unplug the power cord from the electrical outlet of the rear of the machine. Warning! Shock Hazard. Be sure to unplug the power cord before proceeding. 5 Clean the cartridge carrier contacts with clean and cotton swab. 6 Plug in the power cord and reinstall the cartridge. care and care and care and care and care and maintain the print cartridge 37