HP 1010 HP Fax 1010 series - (English) User Guide - Page 46

Display, Status/Solution

Page 46 highlights

hp fax 1010 series Display Status/Solution Exceeded Job Memory Cancel scheduled job and try again The broadcasting and delayed fax can hold 5 jobs in total. Cancel a scheduled job and try again. Ink Low. Install new ink cartridge The print cartridge is low or has run out of ink. To install a new print cartridge, see replace the print cartridge on page 34. Although this message is displayed, you can make a copy or print a report. Incoming faxes will be stored in memory. You must manually print them, see reprinting faxes on page 29. Install ink cartridge Print cartridge is not installed or improperly installed. Install mono ink cartridge The print cartridge should be installed to copy, print a report or receive a fax. Job Not Assigned You attempted to cancel a scheduled job but no jobs are scheduled. Junk Fax Empty You attempted to delete a junk fax number when there is no junk fax number. Junk Fax Full The machine can hold only 20 junk fax numbers. Load Document You must load a document before preceding. Memory Full Memory has become full while receiving a fax. It will not answer the telephone until memory has been cleared. Print any faxes stored in memory and, if necessary, clear scheduled jobs See reprinting faxes on page 29 and see clearing memory on page 29. Memory Full Press Start/Enter to continue Memory has become full while scanning a document. Press Start/Enter to send or copy the scanned pages only. To cancel the job press Cancel and try again when memory becomes available, or split the new document into smaller parts. See clearing memory on page 29. Memory Received Ink Low. Install new ink cartridge The machine has data stored in memory. Replace the print cartridge with new one in order to print the faxes. Memory Received Load paper and press Start/Enter Load paper and press Start/Enter. There might be a jam. Clear the jam as described in paper jams during printing on page 35. Memory Received There is no print cartridge in the machine. Install a print cartridge. Install ink cartridge New Fax Received The machine is low on ink and has received faxes into memory. You must replace the print cartridge (see replace the print cartridge on page 34) and reprint the faxes from memory (see reprinting faxes on page 29). No answer from remote The other machine has not answered after all redial attempts to send a fax fax. No CID Number The machine could not detect the CID (Caller ID) number. No Dial Number There is no number in the redial memory. Not Found The number you are searching for does not exist in memory. Number already registered The number you are trying to enter already exists in the phone book or junk fax list. Number Not Assigned There is no number assigned to this One-Touch or two-digit Speed number. Poll Code Error The remote user entered the wrong poll code. Poll job exists already You have already programmed a polling send. Cancel scheduled job and try again. 40 care and maintenance

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62

40
care and maintenance
hp fax 1010 series
The broadcasting and delayed fax can hold 5 jobs in total. Cancel a
scheduled job and try again.
The print cartridge is low or has run out of ink. To install a new print
cartridge, see
replace the print cartridge on page 34.
Although this
message is displayed, you can make a copy or print a report.
Incoming faxes will be stored in memory. You must manually print
them, see
reprinting faxes on page 29.
Print cartridge is not installed or improperly installed.
The print cartridge should be installed to copy, print a report or
receive a fax.
You attempted to cancel a scheduled job but no jobs are scheduled.
You attempted to delete a junk fax number when there is no junk fax
number.
The machine can hold only 20 junk fax numbers.
You must load a document before preceding.
Memory has become full while receiving a fax. It will not answer the
telephone until memory has been cleared. Print any faxes stored in
memory and, if necessary, clear scheduled jobs See
reprinting faxes
on page 29
and see
clearing memory on page 29.
Memory has become full while scanning a document. Press
Start/Enter
to send or copy the scanned pages only. To cancel the job press
Cancel
and try again when memory becomes available, or split the
new document into smaller parts. See
clearing memory on page 29.
The machine has data stored in memory. Replace the print cartridge
with new one in order to print the faxes.
Load paper and press
Start/Enter
. There might be a jam. Clear the jam
as described in
paper jams during printing on page 35.
There is no print cartridge in the machine. Install a print cartridge.
The machine is low on ink and has received faxes into memory. You
must replace the print cartridge (see
replace the print cartridge on
page
34)
and reprint the faxes from memory (see
reprinting faxes on
page
29)
.
The other machine has not answered after all redial attempts to send a
fax.
The machine could not detect the CID (Caller ID) number.
There is no number in the redial memory.
The number you are searching for does not exist in memory.
The number you are trying to enter already exists in the phone book or
junk fax list.
There is no number assigned to this One-Touch or two-digit Speed
number.
The remote user entered the wrong poll code.
You have already programmed a polling send. Cancel scheduled job
and try again.
Display
Status/Solution