HP 14-an000 Maintenance and Service Guide - Page 42
eMMC module, To remove the eMMC module
View all HP 14-an000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
eMMC module Description eMMC drive, 64 GB, M.2 (includes eMMC board, bracket, cable, foam, and screws) eMMC drive, 32 GB, M.2 (includes eMMC board, bracket, cable, foam, and screws) Spare part number 903803-001 861964-001 Before removing the eMMC module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 26). 5. Remove the optical drive (see Optical drive on page 27). 6. Remove the bottom cover (see Bottom cover on page 30). To remove the eMMC module: 1. Disconnect the cable from the system board (1). 2. Remove the three Phillips PM2.0×3.0 screws (2) that secure the module to the computer 3. Lift the module from the system board (3). 34 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts