HP 14-an000 Maintenance and Service Guide - Page 60
TouchPad button board, To remove the TouchPad button board
View all HP 14-an000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
TouchPad button board Description TouchPad button board (includes cable) Spare part number 813517-001 Before removing the TouchPad button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 26). 5. Remove the optical drive (see Optical drive on page 27). 6. Remove the bottom cover (see Bottom cover on page 30). 7. Remove the system board (see System board on page 48). To remove the TouchPad button board: 1. Disconnect the cable from the TouchPad (1). 2. Remove the three Phillips PM2.0×3.0 screws (2) that secure the TouchPad button board to the computer. 3. Remove the TouchPad button board and cable (3). Reverse this procedure to install the TouchPad button board and cables. 52 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts