HP 14-an000 Maintenance and Service Guide - Page 50

Power button board, Remove the Phillips PM2.0×3.0 screw

Get HP 14-an000 PDF manuals and user guides View all HP 14-an000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

Power button board Description Power button board (includes cable) Spare part number 813516-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 26). 5. Remove the optical drive (see Optical drive on page 27). 6. Remove the bottom cover (see Bottom cover on page 30). To remove the power button board: 1. Disconnect the power button board cable from the system board (1). 2. Remove the Phillips PM2.0×3.0 screw (2) that secures the power button board to the top cover. 3. Rotate the top of the board upward, and then remove the power button board and cable from the computer (3). Reverse this procedure to install the power button board and cable. 42 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
Power button board
Description
Spare part number
Power button board (includes cable)
813516-001
Before removing the power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
26
).
5.
Remove the optical drive (see
Optical drive
on page
27
).
6.
Remove the bottom cover (see
Bottom cover
on page
30
).
To remove the power button board:
1.
Disconnect the power button board cable from the system board
(1)
.
2.
Remove the Phillips PM2.0×3.0 screw
(2)
that secures the power button board to the top cover.
3.
Rotate the top of the board upward, and then remove the power button board and cable from the
computer
(3)
.
Reverse this procedure to install the power button board and cable.
42
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts