HP 14-an000 Maintenance and Service Guide - Page 69

Power connector cable, Remove the display see

Get HP 14-an000 PDF manuals and user guides View all HP 14-an000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Power connector cable Description Power connector cable Spare part number 813505-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 26). 5. Remove the optical drive (see Optical drive on page 27). 6. Remove the bottom cover (see Bottom cover on page 30). 7. Remove the display (see Display assembly on page 53). To remove the power connector cable: 1. Disconnect the cable from the system board (1). 2. Lift the tape and remove the cable from the clips around the fan (2). 3. Lift the power connector cable from the computer (3). Reverse this procedure to install the power connector cable. Component replacement procedures 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
Power connector cable
Description
Spare part number
Power connector cable
813505-001
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
26
).
5.
Remove the optical drive (see
Optical drive
on page
27
).
6.
Remove the bottom cover (see
Bottom cover
on page
30
).
7.
Remove the display (see
Display assembly
on page
53
).
To remove the power connector cable:
1.
Disconnect the cable from the system board
(1)
.
2.
Lift the tape and remove the cable from the clips around the fan
(2)
.
3.
Lift the power connector cable from the computer
(3)
.
Reverse this procedure to install the power connector cable.
Component replacement procedures
61