HP 14-an000 Maintenance and Service Guide - Page 49

Speakers, Disconnect the speaker cable from the system board

Get HP 14-an000 PDF manuals and user guides View all HP 14-an000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Speakers Description Speakers (left and right) Spare part number 858083-001 Before removing the speakers, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 26). 5. Remove the optical drive (see Optical drive on page 27). 6. Remove the bottom cover (see Bottom cover on page 30). To remove the speakers: 1. Disconnect the speaker cable from the system board (1). 2. Remove the cable from the routing path (2), and then lift up and remove the speakers from the computer (3). NOTE: The speakers are not secured with screws. Reverse this procedure to install the speakers. Component replacement procedures 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
Speakers
Description
Spare part number
Speakers (left and right)
858083-001
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
26
).
5.
Remove the optical drive (see
Optical drive
on page
27
).
6.
Remove the bottom cover (see
Bottom cover
on page
30
).
To remove the speakers:
1.
Disconnect the speaker cable from the system board
(1)
.
2.
Remove the cable from the routing path
(2)
, and then lift up and remove the speakers from the
computer
(3)
.
NOTE:
The speakers are not secured with screws.
Reverse this procedure to install the speakers.
Component replacement procedures
41