HP 2000-150CA Service Guide - Page 58
Hard drive, Remove the battery see
View all HP 2000-150CA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive connector cable, bracket, or screws. The hard drive connector cable is included in the Cable Kit, spare part number 646119-001. The hard drive bracket and screws are included in the Hard Drive Hardware Kit, spare part number 646122-001. Description 750-GB, 5400-rpm 640-GB, 5400-rpm 500-GB, 7200-rpm 500-GB, 5400-rpm 320-GB, 7200-rpm 320-GB, 5400-rpm 250-GB, 7200-rpm Spare part number 634250-001 603785-001 634925-001 634638-001 641672-001 and 634862-001 645193-001 and 622643-001 649902-001 and 634861-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 43). 5. Remove the memory module/wireless module compartment cover (see Optical drive (select models only) on page 44). Remove the hard drive: 1. Loosen the captive screw (1) that secures the hard drive compartment cover to the computer. 50 Chapter 4 Removal and replacement procedures