HP 2000-150CA Service Guide - Page 69

Remove the TouchPad button board and cable, that secure the TouchPad button board

Get HP 2000-150CA PDF manuals and user guides View all HP 2000-150CA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Remove the TouchPad button board and cable: 1. Turn the top cover upside down, with the top toward you. 2. Release the TouchPad board cable (1) and the TouchPad button board cable (2) from the top cover. (The TouchPad board cable and the TouchPad button board cable are attached to the top cover with double-sided tape.) 3. Remove the four Phillips PM2.0×4.0 screws (3) that secure the TouchPad button board to the top cover. 4. Remove the TouchPad button board (4) and cables from the top cover. Reverse this procedure to install the TouchPad button board and cable. Component replacement procedures 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
Remove the TouchPad button board and cable:
1.
Turn the top cover upside down, with the top toward you.
2.
Release the TouchPad board cable
(1)
and the TouchPad button board cable
(2)
from
the top cover. (The TouchPad board cable and the TouchPad button board cable are attached to
the top cover with double-sided tape.)
3.
Remove the four Phillips PM2.0×4.0 screws
(3)
that secure the TouchPad button board to
the top cover.
4.
Remove the TouchPad button board
(4)
and cables from the top cover.
Reverse this procedure to install the TouchPad button board and cable.
Component replacement procedures
61