HP 2000-150CA Service Guide - Page 95
Keyboard see, Hard drive see
View all HP 2000-150CA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Description Intel Celeron DC T3300 2.00-GHz processor (1.0-MB L2 cache, 800-MHz FSB) Intel Celeron SC B950 2.10-GHz processor (1.0-MB L2 cache, 800-MHz FSB) Intel Celeron SC B940 2.00-GHz processor (1.0-MB L2 cache, 800-MHz FSB) Intel Celeron SC C925 2.30-GHz processor (1.0-MB L2 cache, 800-MHz FSB) Intel Celeron SC C900 2.20-GHz processor (1.0-MB L2 cache, 800-MHz FSB) Intel Celeron SC B810 1.60-GHz processor (1.0-MB L2 cache, 800-MHz FSB) Spare part number 592399-001 653338-001 653337-001 636636-001 534419-001 646760-001 Before removing the processor, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 43), and then remove the following components: ● Optical drive (see Optical drive (select models only) on page 44) ● Hard drive (see Hard drive on page 50) ● WLAN module (see WLAN module on page 47) ● Keyboard (see Keyboard on page 53) ● Top cover (see Top cover on page 56) ● System board (see System board on page 74) ● Fan and heat sink (see Fan/heat sink assembly on page 79) Remove the processor: 1. Use a flat-bladed screw driver to turn the processor locking screw one-half turn counterclockwise (1), until you hear a click. Component replacement procedures 87