HP 2000-150CA Service Guide - Page 70

USB board, to which the USB board cable is connected, and then disconnect

Get HP 2000-150CA PDF manuals and user guides View all HP 2000-150CA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

USB board Description USB board (includes cable) Spare part number 646128-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 43), and then remove the following components: ● Optical drive (see Optical drive (select models only) on page 44) ● Keyboard (see Keyboard on page 53) ● Top cover (see Top cover on page 56) Remove the USB board: 1. Release the ZIF connector (1) to which the USB board cable is connected, and then disconnect the USB board cable (2) from the system board. 2. Remove the Phillips PM2.5×6.0 screw (2) that secures the USB board to the base enclosure. 3. Remove the USB board (3) and cable. Reverse this procedure to install the USB board. 62 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
USB board
Description
Spare part number
USB board (includes cable)
646128-001
Before removing the USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
43
), and then remove the following components:
●
Optical drive (see
Optical drive (select models only)
on page
44
)
●
Keyboard (see
Keyboard
on page
53
)
●
Top cover (see
Top cover
on page
56
)
Remove the USB board:
1.
Release the ZIF connector
(1)
to which the USB board cable is connected, and then disconnect
the USB board cable
(2)
from the system board.
2.
Remove the Phillips PM2.5×6.0 screw
(2)
that secures the USB board to the base enclosure.
3.
Remove the USB board
(3)
and cable.
Reverse this procedure to install the USB board.
62
Chapter 4
Removal and replacement procedures