HP 2000-150CA Service Guide - Page 73
Speakers, Remove the Phillips PM2.5×9.0 screw
View all HP 2000-150CA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Speakers Description Speaker Kit (includes left and right speakers and cable) Spare part number 647315-001 Before removing the speakers, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 43), and then remove the following components: ● Optical drive (see Optical drive (select models only) on page 44) ● Keyboard (see Keyboard on page 53) ● Top cover (see Top cover on page 56) ● USB board (see USB board on page 62) Remove the speakers: 1. Disconnect the speaker cable (1) from the system board. 2. Release the speaker cables from the clips (2) built into the base enclosure. 3. Remove the Phillips PM2.5×9.0 screw (3) and the three Phillips PM2.5×6.0 screws (4) that secure the speakers to the computer. Component replacement procedures 65