HP 2840 HP Color LaserJet 2820/2830/2840 All-In-One - User Guide - Page 241
Critical error messages, Control panel message, Description, Recommended action - 50 1 fuser error
UPC - 829160742731
View all HP 2840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
Alert and warning messages (continued) Control panel message Description Recommended action Unsupported Memory Card The memory card that you have inserted Insert a card that is supported. See is not a type that is supported. Inserting a memory card. Critical error messages Critical error messages can indicate some kind of failure. Cycling the power might fix the problem. If a critical error persists, the device might require service. Critical error messages Control panel message 50.x Fuser Error 51 Laser Error Description The device has experienced an internal hardware error. The device has experienced an internal hardware error. Recommended action Turn off the device, and then disconnect the power cord. Remove the fuser (see To clear output area jams), and then wait at least 20 minutes. Reinstall the fuser, turn on the device, and then wait for the device to initialize. CAUTION The parts on the internal surface of the fuser are very hot. To avoid burning yourself, do not touch those parts. If a surge protector is being used, remove it. Plug the device directly into the wall socket. Use the power switch to turn on the device. If the error persists, contact HP Customer Care. See Service and support or the support flyer that came in the device box. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. If a surge protector is being used, remove it. Plug the device directly into the wall socket. Use the power switch to turn the device on. If the error persists, contact HP Customer Care. See Service and support or the support flyer that came in the device box. ENWW Control panel messages 225