Home » HP Manuals » Multifunction Devices » HP 3300mfp » Manual Viewer

HP 3300mfp HP LaserJet 3330mfp - (English) Fax Guide - Page 18

Recommended rings-to-answer table, To set the number of rings-to-answer

UPC - 088698450581

Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Recommended rings-to-answer table Use the following table to determine the number of rings-to-answer to use. Type of phone line Recommended rings-to-answer Dedicated fax line (receiving only fax calls) Leave at two rings. One line with two separate numbers and ring pattern service Leave at two rings. (If you have an answering machine or computer voicemail for the other phone number, make sure the product is set to a lesser number of rings than the answering system. Also, see "Enabling answer ring patterns" on page 17.) Shared line (receiving both fax and voice calls) with only an attached phone Set to five rings. Shared line (receiving both fax Two rings more than the answering machine or and voice calls) with an attached computer voicemail. (You cannot set the product to answering machine or computer more than six rings.) voicemail To set the number of rings-to-answer To set or change the number of rings-to-answer, use the following steps: 1 On the control panel, press menu/enter. 2 Using the < and > buttons, select Fax Setup, and press menu/enter. 3 Using the < and > buttons, select Fax Recv. Setup, and press menu/enter. 4 Using the < and > buttons, select Rings To Answer, and press menu/enter. 5 Using the alphanumeric keypad, enter the number of rings-to-answer, and press menu/enter. 16 Chapter 1 Setting up ENGB

Section	Page
Setting up	7
Introduction	7
Connecting the product to a phone line	7
To connect the product to a phone line	8
Connecting additional devices	10
Dedicated fax line	10
Shared phone line	10
To connect additional devices with RJ11 or British Telecom sockets	12
To connect additional devices with British Telecom sockets	14
Specifying the fax settings	15
To enter text from the control panel	15
To set the time and date	15
To set the fax header	16
Setting the answer mode	16
To set the answer mode	17
Setting rings-to-answer	17
Recommended rings-to-answer table	18
To set the number of rings-to-answer	18
Enabling answer ring patterns	19
To enable answer ring patterns	19
Faxing (basic)	21
Loading originals to fax	21
To load fax documents	21
Sending faxes	21
To send a fax to one recipient	21
Changing the default contrast and resolution for outgoing faxes	22
To change the default contrast	22
To change the default resolution	23
Deleting faxes from memory	23
To delete faxes from memory	23
Sending faxes from the software	23
To send a fax from the software	24
Faxing (advanced)	25
About speed-dial codes, one-touch keys, and group-dial codes	25
To program speed-dial codes and one-touch keys	25
To delete speed-dial codes and one-touch keys	26
To quickly program speed-dial codes or one-touch keys	27
To program a one-touch key for alternate long distance	27
To manage group-dial codes	28
To program group-dial codes	28
To delete group-dial codes	29
To delete an individual from a group-dial code	29
To delete all phone book entries	30
Using dialing characters	30
To insert a pause or wait	31
Inserting a dial prefix	31
To set the dial prefix	31
Enabling an extension phone	32
Using manual dial	32
To use manual dial	32
Printing the fax activity log	32
To print the fax activity log	33
Changing the fax call report print times	33
To set fax call report print times	33
Troubleshooting	35
Is your fax set up correctly?	35
What type of phone line are you using?	35
Are you using a surge protection device?	36
Are you using a phone company voice messaging service?	36
Are you using an answering machine?	36
General fax problems	37
Receiving fax problems	38
Sending fax problems	41
Accessing the electronic user guide	44
To access the electronic user guide from the product software	44