HP 3300mfp HP LaserJet 3330mfp - (English) Fax Guide - Page 22

• If the fax number you are calling has a speed-dial code, press speed dial, enter the speed-dial code using the alphanumeric keypad, and press menu/enter. Note When dialing with the alphanumeric keypad, include any pauses or other needed numbers, such as an area code, an access code for numbers outside a PBX system (usually a 9 or 0), or a long-distance prefix. For more information, see "Using dialing characters" on page 28. 2 Load the document into the ADF input tray. 3 Adjust any fax settings, such as resolution. 4 Press fax/send. When the last page of the fax has exited the product, you can start sending another fax, copying, or scanning. To fax to numbers you use regularly, you can assign a one-touch key or speed-dial code. See "To program speed-dial codes and one-touch keys" on page 23 and "To program group-dial codes" on page 26. If you have electronic phone books available, you may be able to use them for selecting recipients. Electronic phone books are generated with third-party applications. Changing the default contrast and resolution for outgoing faxes The contrast affects the lightness and darkness of an outgoing fax as it is being sent. Resolution affects the sharpness of outgoing faxes. It also affects the transmission speed of faxes. To change the default contrast The default contrast is the contrast normally applied to items being faxed. The slider is set to the middle as the default contrast setting. 1 Press menu/enter. 2 Use the < or > button to select Fax Setup and press menu/enter. 3 Use the < or > button to select Fax Send Setup and press menu/enter. 4 Use the < or > button to select Def. Light/Dark. 5 Use the < button to move the slider to the left to make the fax lighter than the original, or use the > button to move the slider to the right to make the fax darker than the original. 6 Press menu/enter to save your selection. 20 Chapter 2 Faxing (basic) ENGB