HP 410 HP Digital Copier printer 410 - (English) Printing Guide - Page 40
hpdigitalcopier printer error messages, communication test failed, firmware revision mismatch
UPC - 844844844303
View all HP 410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
chapter 4 hp digital copier printer error messages communication test failed cause solution The HP Digital Copier Look on the HP Digital Copier Printer display. If the display is blank or Printer is not on. there are no green lights visible on the front-panel, press the On button. Make sure the unit is plugged in to a power outlet and that the power cord is connected securely to the back of your HP Digital Copier Printer. The HP Digital Copier If the HP Digital Copier Printer is not properly connected to the PC, Printer is not communication errors can occur. Make sure the communication cable is connected to the PC. securely connected at both ends. For more information on troubleshooting communication issues, see communication problems on page 29. firmware revision mismatch cause solution The firmware revision Call HP for instructions. number does not match the software. hp digital copier printer not found cause solution The software did not find a connected HP Digital Copier Printer. Make sure that your HP Digital Copier Printer is properly connected to your PC and that it is turned on. out of paper cause solution The paper tray does not have enough paper. Make sure you have the paper tray loaded and on an even surface. The back door is off If you have removed the back door to clear a paper jam, replace it. the unit. paper size error cause The paper size you are using is not compatible with the HP Digital Copier Printer. solution Load a different-sized paper, then adjust the paper-type and paper-size settings. 36 hp digital copier printer 410