HP 410 HP Digital Copier printer 410 - (English) Printing Guide - Page 5

set up printing 1 about this guide This HP Digital Copier Printer 410 Printing Guide contains the information you need to connect your new HP Digital Copier Printer to a computer rather than using the unit as a stand-alone copier. This connected option allows you to use your unit as a copier/printer with a wide range of settings and print functions. Before you use this guide, be sure to thoroughly read and understand the HP Digital Copier Printer 410 Reference Guide, which contains information that you need to know about your copier/printer before installing the software. install your hp digital copier printer software Your HP Digital Copier Printer comes with a universal serial bus (USB) cable you can use to connect your copier/printer to a computer running Windows 98, 98SE, Me, 2000, or XP. This USB connection turns your stand-alone copier into a copier/printer that lets you print from your computer. before you install the software Connecting to your HP Digital Copier Printer with the USB cable is very simple. 1 Before connecting your copier/printer with the USB cable, follow the instructions on the HP Digital Copier Printer 410 Setup Poster that came with the copier/printer, and make a test copy. 2 Close all virus protection programs and other software running on your computer. 3 With your copier/printer powered on, connect your copier/printer to your computer by plugging in the USB cable. what works Plugging into the USB port on your computer Plugging into a powered hub that is connected to the USB port on your computer what does not work Plugging into the USB port located on the keyboard Plugging into a non-powered USB hub Tip: The ends of the USB cable are not identical. One end will fit into your computer or hub and the other end will only fit into the HP Digital Copier Printer. 1