HP 4x1Ex32 HP IP Console Viewer User Guide - Page 102
Enabled, Disabled
View all HP 4x1Ex32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
• PPP settings-When PPP is enabled, you specify the local IP address that will be used to communicate with this serial console switch over a PPP connection on the serial CLI port. You also specify the remote IP address for the client that connects to the serial console switch over the PPP connection. A subnet mask can also be included. To change CLI settings: 1. Select CLI. 2. Select the terminal emulation type for the CLI port from the dropdown list in the Terminal Type field. 3. Enter a zero- to 64-character string containing the command to set the modem to autoanswer mode in the Modem Initialization field. If no modem is connected, leave this field blank. 4. Select Enabled or Disabled from the dropdown list to indicate whether a user can connect to other serial ports from the CLI port in the Connect Control field. 5. Enter a caret (^) and the character that is used to access CLI mode during a server session in the CLI Access Character field. The character entered after the caret can be a letter or one of the following: left bracket ([), right bracket (]), caret (^), underscore (_), or backslash (\). The caret character represents the key, and in combination with the next character can be used to access the console switch CLI mode during a server session. ^D or D is the default. Managing serial console switches 102