HP 8/40 Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Apri - Page 149
Tape Or Media Not Defined., Lkm | Rkm | Skm
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
cryptoCfg 2 --dhresponse vault_IP_addr --zeroizeEE slot_number Accepts the LKM Diffie-Hellman response from the specified NetApp LKM appliance and generates the link key on the node on which this command is issued. The DH response occurs by an automatic trusted link establishment method. The LKM appliance must be specified by its vault_IP_addr. The DH challenge request must be approved on the Net App LKM appliance for this command to succeed. Specifies the IP address of the NetApp LKM appliance. This operand is required. Zeroizes all critical security parameters on the local encryption switch or blade including all data encryption keys. This command is valid on all nodes. This command prompts for confirmation and should be exercised with caution. Specifies the slot number of the encryption engine to be zeroized on a bladed system. --delete -file local_name Deletes an imported file. The file must be specified by its local name. This command is valid on all nodes. Specifies the file to be deleted form the local directory where certificates are stored. --show -localEE -file -all Displays node configuration information. This command requires one of the following mutually exclusive operands: Displays encryption engine information local to the node, such as encryption engine state and primary/secondary keyencryption key (KEK) information, routing policy, and media type. Possible values for media type include DISK, TAPE or MEDIA NOT DEFINED. Displays all imported certificates. The -all parameter is required with the --show -file command. Function 2. Encryption group configuration Synopsis cryptocfg --help -groupcfg cryptocfg --create -encgroup encryption_group_name cryptocfg --delete -encgroup encryption_group_name cryptocfg --reg -keyvault cert_label certfile hostname | ip_address primary | secondary cryptocfg --dereg -keyvault cert_label cryptocfg --reg -KACcert signed_certfile cryptocfg --set -keyvault LKM | RKM | SKM cryptocfg --set -failbackmode auto | manual cryptocfg --set -hbmisses value cryptocfg --set -hbtimeout value cryptocfg --add -membernode node_WWN Fabric OS Command Reference 121 53-1001186-01