HP 8/40 Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Apri - Page 352
fwShow, Synopsis, persistence, disable, Description, fwCon Notes, Operands, Examples
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 352 highlights
2 fwShow fwShow Displays the class thresholds monitored by Fabric Watch. Synopsis fwshow [--port --persistence] | [--disable --port] Description Use this command to display the thresholds monitored by Fabric Watch. This command also displays the port persistence time and ports with all disabled thresholds. For a description of the class thresholds supported in Fabric OS and the restrictions that apply to some of the classes in terms of support for V/VE/VEX ports and GbE ports, refer to the help page for fwConfigure or consult the Fabric Watch Administrator's Guide. In Access Gateway mode, only the following class thresholds are supported. F/FL Port (Copper) class threshold is supported only on Embedded platforms. TABLE 15 Access Gateway mode classes Class Environmental SFP Port Fabric F/FL_Port (Optical) F/FL_Port (Copper) Resource Notes This command requires a Fabric Watch license. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands The operands are as follows: --port --persistence Displays the time (in seconds) that a port must be persistently in a state before being marked as such. --disable --port Displays the ports that have all associated thresholds disabled. Examples To display thresholds for a fan in the SFP class: switch:user> fwshow 1 : Show class thresholds 2 : Detail threshold information 3 : Show port persistence time 4 : Quit Select an item => : (1..4) [3] 1 1 : Environment class 2 : SFP class 3 : Port class 4 : Fabric class 324 Fabric OS Command Reference 53-1001186-01