HP 8/40 Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Apri - Page 57
NOTE: Preferred Port commands are discussed in detail below.
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
6. To delete F_Port 5 that was mapped to N_Port 2: switch:admin> ag --mapdel 2 "5" Preferred N_port is set for F_Port[s] Please delete it before removing primary N_Port ERROR:Unable to remove F_Port[s] from mapping, retry the command switch:admin> ag --prefshow F_Ports Preferred N_Port 10;11 0 4;5;6 2 7;8;9 3 switch:admin> ag --prefdel 5 2 Preferred N_Port is deleted successfully for the F_Port[s] switch:admin> ag --mapdel 2 "5" F_Port to N_Port mapping has been updated successfully NOTE: Preferred Port commands are discussed in detail below. AG failover policy commands 1. To display failover policy settings for all N_Ports: switch:admin> ag --failovershow N_Port failover_bit 0 1 1 0 2 1 3 0 2. To set and display failover and failback policies on a single port: switch:admin> ag --failoverenable 1 Failover policy is enabled for port 1 switch:admin> ag --failoverdisable 0 Failover policy is disabled for port 0 switch:admin> ag --failovershow 0 Failover on N_Port 0 is not supported switch:admin> ag --failbackdisable 2 Failback policy is disabled for port 2 admin> ag --failbackshow 2 Failback on N_Port 2 is not supported switch:admin> ag --failbackenable 2 Failback policy is enabled for port 2 ag 2 Fabric OS Command Reference 29 53-1001186-01