HP 8/40 Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Apri - Page 228
Examples, See Also, fabricShow, To disable the principal mode selection
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
2 fabricPrincipal [-f ] mode Sets the principal switch mode. Specify 1 to enable principal switch mode. Specify 0 to disable principal switch mode. Optionally use the -f operand to force a fabric rebuild. Mode changes take effect when the fabric rebuilds. This operand is optional. Examples To enable a high fabric principle priority setting: switch:admin> fabricprincipal --enable -p 0xff -f Principal Selection Mode enabled (Activate in next fabric rebuild) To disable the principal mode selection: switch:admin> fabricprincipal --disable Principal Selection Mode disabled To display the current mode setting: switch:admin> fabricprincipal -q Principal Selection Mode: Enable To disable the mode setting: switch:admin> fabricprincipal 0 Principal Selection Mode disabled To enable the mode setting: switch:admin> fabricprincipal 1 Principal Selection Mode enabled To enable the mode setting and force fabric rebuild: switch:admin> fabricprincipal -f 1 Principal Selection Mode enabled (Forcing fabric rebuild) See Also fabricShow 200 Fabric OS Command Reference 53-1001186-01