HP 8/40 Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Apri - Page 842
usbStorage, Removes data in a specified application storage space. Valid applications
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 842 highlights
2 usbStorage usbStorage Manages data files on an attached USB storage device. Synopsis usbstorage [-e | --enable] usbstorage [-d | --disable] usbstorage [-l | --list] usbstorage [-r | --remove application area ] usbstorage [-h | --help] Description Use this command to control a USB device attached to the Active CP. When the USB device is enabled, other applications, such as supportSave, firmwareDownload, firmwareKeyupdate, or configDownload/cfgUpload can conveniently store and retrieve data from the attached storage device. Refer to the help pages for these commands for specific information on how the USB device is accessed by each application. Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command is available only on the Active CP. Operands All operands are exclusive. Only one operand can be specified, followed by suboperands if applicable. -e | --enable Enables the USB device. The USB device must be enabled before the list and remove functions are available. -d |--disable Disables an enabled USB device. This command prevents access to the device until it is enabled again. -r |--remove application area Removes data in a specified application storage space. Valid applications are: firmware, support, config, or firmwarekey. A specified application must be followed by an application area. Any existing file in a given application directory can be specified. This command removes all data associated with the specified application area. -l |--list Lists the content of the USB device up to two levels down from the root directory. -h |--help Displays command usage. Examples To enable an attached USB device: switch:admin> usbstorage -e USB storage enabled To list the contents of the attached USB device: switch:admin> usbstorage -l firmwarekey\ 0B support\ 106MB support1034\ 105MB config\ 0B 2007 Aug 15 15:13 2007 Aug 24 05:36 2007 Aug 23 06:11 2007 Aug 15 15:13 814 Fabric OS Command Reference 53-1001186-01